Alto MKII 200 Lifter

From the manufacturer

**Tested to AS ISO 10535:2002** (Hoists for the transfer of disabled persons). Australian made. That standard is the one an assessor will look for on a hoist funding submission. **Under-bed clearance 126 mm.** This is the number that decides whether the hoist can be used at all, and it is the one most often missed at assessment. Measure the client's actual bed before specifying — many divan and adjustable bases sit lower than this, and a hoist that cannot get its legs under the bed is useless regardless of its lift capacity. Key dimensions: - **Base width 645 mm minimum, 1130 mm maximum** — the minimum figure determines whether it fits through internal doorways - **Lift range 362–1785 mm at the yoke**, 325–1600 mm on the pivot frame. The 362 mm bottom of range is what allows a floor recovery after a fall - **100 mm castors**, hoist weight **42 kg** Electric leg spread is standard rather than an option, so the carer does not need a foot pedal or free hand to widen the base around a chair. Battery level shows on both the lifter and the handset, and there are duplicate up/down buttons on the control box — usable if the handset fails or is out of reach mid-transfer. **Safe working load 200 kg.** Attachments (yokes, pivot frames, scales) are sold separately.

We aim to make our range as accessible as possible. Some products may not be available in all areas — please contact BMS Plus to confirm availability and discuss suitable options.